Contributions:NeuroOmegaADC
Versioning
Author
Alexander Belsten (belsten@neurotechcenter.org)
Version History
- 2021/06/17: Initial working release R6310.
Source Code Revisions
- Initial development: 6274
- Known to compile under: 6319
- Broken since: --
Functional Description
This source module allows you to collect electrophysiological data from the Alpha Omega Neuro Omega clinical recording system. The Neuro Omega can record from a variety of modalities, such as ECoG, sEEG, micro and macro contacts. It is often used for the placement of deep brain stimulating electrodes, facilitated by its ability to sonify local field potentials and drive the DBS lead to precise depths.
Integration into BCI2000
Compile the source module by enabling BUILD_PRIVATE in your CMake configuration and generating the BCI2000 solution. Access to the private directory in the SVN is necessary. Then compile the source module, and make NeuroOmegaADC the source module in your batch file.
Parameters
NeuroOmegaMAC
This parameter should be the MAC address of the Neuro Omega system.
HostMAC
This parameter should be the MAC address of the BCI2000 recording computer.
RecordingChIDs
This parameter should be a list of channel IDs corresponding the channels you want to record from. Each of these channels must have the same sampling rate.
SourceCh
This parameter should be "auto", as it is determined by the size of the "RecordingCHIDs" parameter.
SampleBlockSize
Number of samples that are transmitted at a time.
SamplingRate
Some channels on the Neuro Omega are recorded at different sampling rates so this parameter is dictated by the configuration of the clinical system and must be manually entered accordingly. Information on how to check the sampling rate of a given channel is coming soon.
SourceChGain
SourceChOffset
ChannelNames
This should be set to auto, as the names of the channels will be automatically acquired from the Neuro Omega.
EnablePortInputs
Currently does not work!
Enabling this parameter will record from both 16-bit D-Sub digital input connectors to the Port1 and Port2 states.
DetectionType
This dictates what triggers a high value from the 16-bit digital inputs. If set to mean, bit values from the Ports will be accumulated over the duration of a sample block and the state will be equal to the mean of these accumulated values. If set to RisingEdge, the state's bit values for a block will be high if the corresponding bit was high during that block.
ChannelInfo
This is a read only parameter that will be populated with channel information from the Neuro Omega (namely the mapping between channel IDs (integers) and channel names).
States
NeuroOmegaTimeStamp
Port1
This is a 16-bit state recorded from the 16-bit D-Sub digital input 1 connector on the Neuro Omega.
Port2
This is a 16-bit state recorded from the 16-bit D-Sub digital input 2 connector on the Neuro Omega.