Contributions:RHX

Synopsis

The Intan RHS has four SPI ports (with each port labelled A,B,C,D) which sends data to a FPGA. These ports communicate with the chips located on supported headstages. Each port has four output signals responsible for communication with the amplifier chips, two of which (MISO1,MISO2) are used to transmit data. Each chip controls 16 channels, and each chip transmits data over a single MISO line. Over all four ports, this means there are 8 lines over which data can be sent.

• 
  RHS2116 Amplifier chip on 32 channel headstage

Attatched to the FPGA is an Opal Kelly XEM6010 USB/FPGA interface which can be used to read data in the FPGA via USB. This module has 128MByte SDRAM