User Reference:IIRBandpass

From BCI2000 Wiki
Revision as of 18:56, 23 May 2014 by Jhill (talk | contribs) (Parameters)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Synopsis

Design an IIR filter consisting of up to three parts (high-pass, low-pass and notch) and apply it as part of the signal-processing chain. To use it as a bandpass, specify the desired lower end of the band as a high-pass corner, and the desired upper end of the band as a low-pass corner.

Authors

Jeremy Hill

Parameters

HighPassCorner

High-pass cutoff frequency. The default is 0, which disables the high-pass.

HighPassOrder

Filter order for the high-pass. The default is 2. A value of 0 disables the high-pass.

LowPassCorner

Low-pass cutoff frequency. The default is 0, which disables the low-pass.

LowPassOrder

Filter order for the low-pass. The default is 4. A value of 0 disables the high-pass.

NotchCenter

Notch center frequency. The default is 0, which disables the notch filter.

NotchOrder

Filter order for the notch. The default is 4. A value of 0 disables the notch filter.

States

None.

See also

User Reference:Filters, Contributions:HilbertSignalProcessing