Difference between revisions of "User Reference:IIRBandpass"

From BCI2000 Wiki
Jump to: navigation, search
m (Contributions:CustomIIRFilter moved to User Reference:IIRBandpass: Filter moved into shared/modules/signalprocessing)
(No difference)

Revision as of 15:23, 21 June 2012

Synopsis

Design an IIR filter consisting of up to three parts (high-pass, low-pass and notch) and apply it as part of the signal-processing chain.

Location

http://www.bci2000.org/svn/trunk/src/contrib/SignalProcessing/HilbertSignalProcessing/CustomIIRFilter.cpp

Versioning

Authors

Jeremy Hill

Parameters

HighPassCorner

High-pass cutoff frequency. The default is 0, which disables the high-pass.

HighPassOrder

Filter order for the high-pass. The default is 2. A value of 0 disables the high-pass.

LowPassCorner

Low-pass cutoff frequency. The default is 0, which disables the low-pass.

LowPassOrder

Filter order for the low-pass. The default is 4. A value of 0 disables the high-pass.

NotchCenter

Notch center frequency. The default is 0, which disables the notch filter.

NotchOrder

Filter order for the notch. The default is 4. A value of 0 disables the notch filter.

States

None.

See also

User Reference:Filters, Contributions:SignalProcessing, Contributions:HilbertSignalProcessing