Beta Version of the BIOSEMI acquisition module.
Pressing "Set Config" more than once per BCI2000 launch currently (svn revision 2190) results in unstable amp behaviour.
When acquiring at SamplingRate less than the hardware sampling rate, crude averaging of the EEG and AIB signals is performed over each batch of samples: this is better anti-aliasing than the original simple decimation strategy, but still not ideal. Ideally a properly-designed FIR filter would be used prior to decimation.
Samuel A. Inverso (firstname.lastname@example.org), Yang Zhen, Maria Laura Blefari, Jeremy Hill
Revision 2.1 2009/05/27 jhill: Bugged trigger signal acquisition fixed and tested. Also added an option to acquire trigger signals simultaneously in one 16-bit channel.
Revision 2.0 2008/11/07 jhill: Updated design, including support for an auxiliary Analog Input Box (AIB) EEG + AIB acquisition tested---triggers not.
Revision 1.2 2008/10/25 Maria Laura Blefari: Fixed the ERROR: Mode changed from 4 to 0
Revision 1.1.1 2005/12/14 15:24:15 mellinger: Fixed state name typo in Process().
Revision 1.1 2005/12/12 00:05:24 sinverso Initial Revision: Working and tested offline. Not tested in real experiments.
Source Code Revisions
- Initial development: 960
- Tested under: 2189
- Known to compile under: 2189
- Broken since: --
Acquires from a Biosemi Act2. Version 1.0 tested with a MK1. Versions 1.2 and up tested on a MK2.
EEG channels, Analog Input Box (AIB) channels, and one-bit channels reflecting the digital trigger input states are acquired in sync.
Warning: If TriggerChList is empty, the trigger values will not be saved in the data files and are not recoverable.
Copy the Labview_DLL.dll to the prog directory for the module to work.
As of version 2.0 (svn revision 2189) the old parameters PostFixTriggers and TriggerScaleMultiplier have been removed. The functionality of the former is replaced by TriggerChList and the latter can be simulated by setting the corresponding elements of SourceChGain accordingly.
A list of (one-based) indices to the EEG channels to be acquired. If there are n indices in this list, then the first n channels will be EEG channels.
A list of indices (each in the range 1 through 32 inclusive) indicating which Analog Input Box channels are to be acquired. By default, none are acquired. AIB channels are postfixed immediately following the EEG channels.
The old PostfixTriggers parameter has been replaced by this, a list of indices (each in the range 1 through 16 inclusive) indicating which one-bit trigger channels to postfix after the EEG and AIB channels. By default, all 16 are postfixed.
Set to 1 when hardware reports low battery state.
The mode corresponding to the one on the front of the Biosemi box.
Set to 1 when connected to an MK2.