Hi all,
I'm continuing my experiment with BCI2000. I've design my own application and now I'm trying to connect bci to it.
I've created an UDP socket with port 5000. In ConnectorOutputAddress i wrote "localhost:5000" (bci and app are on the same computer).
So, the connections starts correctly but the only info I can receive is "Running 1" (or "Running 0" when suspend). I'm programming in C#.
I'm trying to receive signals from CursorTask_SignalGenerator file batch.
Ideas to receive all signal informations?
Thank you.
Only receiving "Running 1"
Re: Only receiving "Running 1"
Lavncent,
you should be receiving more state. It could be that your C# implementation is faulty. Can you please try the AppConnectorExample or the readudp.m MATLAB script as detailed in the tutorial:
http://www.bci2000.org/wiki/index.php/T ... _Connector
Regards, Peter
you should be receiving more state. It could be that your C# implementation is faulty. Can you please try the AppConnectorExample or the readudp.m MATLAB script as detailed in the tutorial:
http://www.bci2000.org/wiki/index.php/T ... _Connector
Regards, Peter
Re: Only receiving "Running 1"
Hi Peter,
thank you for your continued support.
Yes, my code was somehow wrong.
If someone can find it helpful, I solved the problem adding the function .Recive() in more than one line. In this way, the socket is able to receive all UDP datagram.
Ty again,
LaV
thank you for your continued support.
Yes, my code was somehow wrong.
If someone can find it helpful, I solved the problem adding the function .Recive() in more than one line. In this way, the socket is able to receive all UDP datagram.
Ty again,
LaV
Who is online
Users browsing this forum: No registered users and 32 guests