View source for Contributions:EnobioADC

==Parameters==

===SourceCh=== 
Indicates the number of Enobio channels to be acquired. Maximum value is 8.

===SampleBlockSize=== 
Number of samples transmitted at a time. SampleBlockSize is 30 by default.

===SamplingRate=== 
Number of samples per second recorded for each channel. Fixed value to 500.

===SourceChOffset, SourceChGain===
A SourceChOffset of 0, and a SourceChGain of 0.001 converts A/D units to microVolts.

===ChannelNames===
list of channel names

===BluetoothMac=== 
Enobio device Bluetooth MAC address 00:07:80:XX:XX:XX (look at the back of your Enobio device to get yours)

===EEGChList=== 
List of physical channel indices of the EEG channels in use.

===TriggerChList=== 
List of one-bit trigger channels to append to the end or a single 0 to acquire all trigger channels as a single 16-bit channel.

===NotchFilter=== 
Filter to remove the influence of the power line noise. Set to 50Hz in Europe or 60Hz in America.

===HighPassFilter=== 
Filter to remove the signal drift and/or low frequencies influence.

===LowPassFilter=== 
Filter to remove high frequencies influence.

===AllignChannels=== 
Bit indicating if channels shall be aligned in time. As default set as true (1).

===SourceChTimeOffset=== 
Fixed delay of the incoming signal. Empty as default.

===TransmitChList=== 
List of the channels to take part in the preprocessing stage.